[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron
[Sintron] TW-102 Office 3D Printer Upgrade Version -  Full Complete Kit for Prusa i3 DIY - Sintron

[Sintron] TW-102 Office 3D Printer Upgrade Version - Full Complete Kit for Prusa i3 DIY

Regular price $299.95 $199.95 Sale

click to check Delivery Time

Sintron TW-102 High Quality Precision 3D Printer

 

Overview 

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + 2040 high quality aluminum extrusion profile, this 3D printer has a simple structure, light and portable, beautiful and trendy. 

This kit include all the parts you need for building Sintron TW-102 3D printer. you might be wondering what are the difference between ours and others.

 

 

the main difference would be:

1. TW-102 is with small volume, light weight & portable !! once completed, it's very easy to carry it anywhere, anytime !

2. TW-102 is quiet, low noise, and blends into your office perfectly! this is not just a machine, it's also a decoration for your office! a way of fashion!

 

   

 

3. we don't adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder's special design also ensure you a pleasant & smoth printing.

The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made all metal design to replace plastic parts bowden extruder. We use SINTRON well-designed standard MK11 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent "jammed" problem. printing speed up to 100mm/s.

 

4. Exclusive Anti-Backlash design for Z axis, this makes the movement very quiet and stable. only Sintron got this design in the Market now!

 

5. TW-102 uses 2040mm V-slot aluminum extrusion & fine Acrylic materials as main Frame. this makes TW-102 more accurate in printing.

 

 

6. Wiring has never been as easier as TW-102. you are not a expert of electronics ? Never Mind ! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don't). so it would look tight and clean! no extra mess.

 

 

7. Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws and nuts for you. this would save you lots of time!

 

 

8. TW-102 has complete pdf instruction as well as Exploded view video (Video exclusively by Sintron) --> hardware parts

 

TW-102 has open source preconfigured Marlin configuration --> firmware part

 

we also provide software for TW-102: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! --> software part

 

 

9. Energy Saver! TW-102 consumes only 1/3 energy of ordinary 3d printer, TW-102 adapts special tape. so you don't need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-102 by default won't suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it's also a trend to use only PLA as it's enviormental friendly and no harm for human body.

 

10. Sintron TW-102 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

 

 

this is already our 4th model of 3D printer, so trust us. we are professional!

 

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it's the hardware problem and focus on project only.

 

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it's normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there's some one you can ask, you will save a lot of time.

 

Specifications

 

Package includes

 

for US customer, we will send with US plug power adapter

for UK customer, we will send with UK plug power adapter

for AU customer, we will send with AU plug power adapter

for DE customer, we will send with DE plug power adapter

 

if you have special request, please let us know before shipment.