Sintron ST-030 is a Multi function & Mode relay module with LCD display, very clear, easy to use and powerful.It can be widely used at Smart home, Industrial control, Automatic irrigation, Indoor ventilation. Protection equipment.
Example: usually you can use a button, switch or even CH-926 coin acceptor (for business use) to trigger ST-030 and then control the device such as LED, Charger, Power etc..
ps. you can search "CH-926 with ST-030" to see how it works.
Product Highlights:
Display with LCD two columns, Can display parameters directly;
Trigger mode: high and low level, switch quantity.meet most of the needs.
Power supply: 6~30V, also supports micro USB 5.0V, very convenient.Anti back connection of power supply.
Parameters can be modified via UART.
Stop button to provide emergency stop function.
5 minutes without any operation into a low-power state. Any action wake up.
OP/CL/LOP params can be modified individually
All parameters are automatically saved by power off.
Product Parameters: Working voltage: DC 6V~30V, support micro USB 5.0 V power supply Working current: 50mA. Static Current: 15mA Max. Output load: DC 30V 5A and AC 220V 5A. Trigger signal source: High level trigger (3.0V~24.0V), low level trigger (0.0V ~0.2V), switching value control (Potential free contact) Service life: more than 100,000 times Working temperature: -40-85°C
Timing Range:
0.01 sec~9999 min
Working Mode Introduction(P1~P7)
P1: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, the signal is invalid.
P2: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, the signal triggers a new timer.
P3: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, signal trigger reset timer, relay disconnected and stop timing.
P4: When triggered, After the relay is disconnected from CL time, relay conduction OP time, after timing is complete, disconnect relay.
P5: When triggered, After the relay conduction op time, the relay disconnects the CL time, and then loops the above action, gives the signal again in the loop, relays disconnect, stops the timer, and the number of cycles (LOP) can be set;
P6: When triggered, After the relay conduction op time, the relay disconnects the CL time, and then loops the above action, signal is invalid in the loop, the number of cycles (LOP) can be set;
P7: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;
for more info, please search Sintron ST-030 to download Manual and check video demo.
