[Sintron] UNO R3 Upgrade Kit with Motor LCD Servo Module for Arduino AVR Starter

Overview
This listing is for an [Sintron] UNO R3 Upgrade Kit with Motor LCD Servo Module for Arduino AVR Starter.

This is a more comprehensive kit than our other Arduino Kits for Arduino , with this kit, you are able to do more experiment, get your more idea into real action without the restriction of hardware part, and we also provide you pdf files to save your time becoming an expert for this. We believe with this hardware + software support, you are able to become expert programmer ( developer ) very soon, so don't wast time, just get this kit, and start your project right away!

Tech Specifications
(1) Microcontroller: ATmega328 
(2) Operating Voltage: 5V 
(3) Input Voltage (recommended): 7-12V 
(4) Input Voltage (limits): 6-20V 
(5) Digital I/O Pins: 14 (of which 6 provide PWM output) 
(6) Analog Input Pins: 6 
(7) DC Current per I/O Pin: 40 mA 
(8) DC Current for 3.3V Pin: 50 mA 
(9) Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader 
(10) SRAM: 2 KB (ATmega328) 
(11) EEPROM: 1 KB (ATmega328) 
(12) Clock Speed: 16 MHz 

Package included
(1) Arduino-compatible UNO R3 x 1 
(2) Development Expansion Board x 1 
(3) Mini Breadboard x 1 
(4) 830 Point Solderless Breadboard x 1 
(5) Stepping Motor Driver Board x 1 
(6) 1602 LCD Module x 1 
(7) 8 x 8 dot matrix display x 1 
(8) LEDs x 15 
(9) LED Seven-segment Displays (1-digit) x 1 
(10) LED Seven-segment Displays (4-digit) x 1 
(11) Stepping Motor x 1 
(12) Tower Pro Micro Servo 9g (SG90 ) x 1 
(13) Active Buzzer x 1 
(14) Passive Buzzer x 1 
(15) 8-bit Shift Register ( 74HC59 ) x 1 
(16) Potentiometer ( Adjustable Resistor ) x 1 
(17) LM35 Temperature Sensor x 1 
(18) 1k Ohm Resistors x 5 
(19) 10k Ohm Resistors x 5 
(20) 220 Ohm Resistors x 8 
(21) Light Dependant Resistor x 3 
(22) Yellow Push Bottons x 4 
(23) Flame Sensor x 1 
(24) Infrared Receiver x 1 
(25) Tilt Sensors / Switches x 2 
(26) USB Cable x 1 
(27) Jumper Wires x 30 
(28) 40 Pin Header (2.54 mm) x 1 
(29) IR Remote Control x 1 
(30) 9V Battery x 1 
(31) 9V Battery Case x 1 
(32) SMD component box x 1 
(33) Sintron Box x 1

For electronic parts, you can also check our store maker-diy.com

Some products show
(1)Arduino-Compatible UNO R3 Board
With this product, you are able to use all the Arduino open source platform to create or learn interactive objects, it will be a lot of fun while you are creating and learning it, so just get this and start it, we also provide reference pdf files that can help you to improve skills very quickly. After all, time matters, the sooner you can improve your programing skills, the sooner you can create amazing projects! 

Tech Specifications
(1) Microcontroller: ATmega328 
(2) Operating Voltage: 5V 
(3) Input Voltage (recommended): 7-12V 
(4) Input Voltage (limits): 6-20V 
(5) Digital I/O Pins: 14 (of which 6 provide PWM output) 
(6) Analog Input Pins: 6 
(7) DC Current per I/O Pin: 40 mA 
(8) DC Current for 3.3V Pin: 50 mA 
(9) Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader 
(10) SRAM: 2 KB (ATmega328) 
(11) EEPROM: 1 KB (ATmega328) 
(12) Clock Speed: 16 MHz 

for more informations, you can check here: [Sintron] UNO R3 ATMEGA328P + USB Cable + Reference PDF Files for Arduino's IDE
 

(2)UNO R3 Development Expansion Board
Duemilanove used in conjunction with ProtoShieldprototype extension boards, used to build the circuit prototypes directly on the board welding components, mini bread plate above can also be connected to the circuit. Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate.
 
The ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very fit and with the build circuit prototype.

for more informations, you can check here: UNO R3 Proto Shield Prototype Expansion Board with SYB-170 Mini Breadboard Based for Arduino Diy Kit
 

(3)830 Point Solderless Bread Board
Brand new and high quality
Model: MB-102
Ever-muse electronic
Ideal for high frequency and low noise circuits
Interconnect any components with 20-29 AWG(0.3-0.8 mm) wire
Special designed spring clip over 5,000 insertion cycles
Nickel plated, silver plated and gold plated available

for more informations, you can check here: Solderless MB-102 MB102 Breadboard 830 Tie Point PCB BreadBoard For Arduino
 

(4)1602 LCD Modules
Brand new and high quality.
Wide viewing angle and high contrast.
Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment
such as routers and storage devices.
LCM type: Characters
Can display 2-lines X 16-characters.
Voltage: + 5V DC.

for more informations, you can check here: Backlight Screen With LCD 1602 Display For Arduino Blue Module 1602A 5V
 

(5)SG90 9G Servo
Features
Translucent Body
Light Weight
Less Noise
Connector Wire Length 150mm
Brand new and full packing.
Great for boat, racing car, helicopter and airplane.
Stable and shock proof.
Operating speed: 0.12sec / 60° (4.8V no load).
Stall torque: 1.2 kg / cm (4.8V), 1.6 kg / cm (6.0V).
Operation voltage: 3.5 - 6.0V.
Temperature range: -30°C -- +60°C.
Dead band width: 5usec.
Gear type: nylon gears.
Connector type: Futaba / JR compatible.

Specifications
Dimensions: 23 x 12.2 x 29mm
Operating Speed (4.8V no load): 0.1sec / 60 degrees
Stall Torque (4.8V): 1.6kg/cm
Temperature Range: 0 to + 55 degree C
Dead Band Width: 10us
Operation Voltage: 4.8 Volts
Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane
Color: blue
Net weight: 13g
Connector wire length: 250mm

for more informations, you can check here: CFsunbird RC Micro SG90 Servo 9g For Arduino Aeromodelismo Align Trex 450 Airplane Helicopters Accessories

(6)5V Stepper Motor
Rated Voltage: DC 5V 4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625/64
DC Resistance: 200±7% (25)
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.
Temperature Rise: <40K(120Hz)
Noise: <40dB (120Hz, No load, 10cm)
Board Size: Approx. 29 ×21 mm

for more informations, you can check here: 1set 5V 4-phase Stepper Motor + Driver Board ULN2003 kit for Arduino
 

(7)ULN2003 Driver Board
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and other characteristics, adapted to the requirements of various types of high-speed high-power drive system. ULN2003 circuit is the United States Texas Instruments and Sprague company developed high-voltage high-current Darlington transistor array circuit, the paper describes its circuit structure, characteristic parameters and typical applications.

1. Using ULN2003 high-power Darlington chip-driven stepper motor.
2. Increased output expansion interface.
3. A, B, C, D light-emitting diode instructions four-phase stepper motor work with the state of the standard stepper motor interface, can be used directly plug.